You are here
Clinical Flame Photometer
Product code:
PFP7/C
Features:
Clinical Flame Photometer
Features:
- Designed for clinical analysis
- Supplied with Na, K and Li filters
- Low temperature, single channel
- Flame failure safety system
- Operates with propane, butane, natural gas or LPG
Technical Specification:
| Parameter | PFP7/C |
| Range | 120 to 160mmol/l Na, 0 to 10.0mmol/l K |
| Limits of detection Na | 0.2ppm |
| K | 0.2ppm |
| Li | 0.25ppm |
| Reproducibility | <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50 |
| Linearity | < 2% error when 3ppm Na/K and 5ppm Li are set to read 100 |
| Stability | < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5% |
| Recorder output | Nominal 1.00V for a reading of 100.0 |
| Electrical supply | 90–125V or 190–250V @50/60Hz |
| Air supply | Moisture and oil free, 6 litre/min @ 14psi |
| Fuel | Propane, butane, natural gas or LPG |
| Size (w x d x h) | 420 x 360 x 300mm |
| Weight | 8kg |
LAB Equipment
- Balance
- Bath
- C.O.D meter
- Centrifuge
- Chamber
- Colony counter
- kalorimetre
- Density meter
- Flame Photometer
- Heating mantle
- Hot plate
- Incubator
- Kjeldahl analyzer
- Melting Point Apparatus
- Muffle Furnace
- Microwave Reaction System
- oven
- Hand Held Refractometer
- Sample Concentration
- Shaker
- Spectrophotometer
- Ultrasonic cleaner
- Viscometer
- Water distiller
- Water purification system
- pH & Conductivity Meter
- Hotplate Stirrers
- Rotary Evaporator
- Mixer & Rotator
- Homogeniser
- Overhead Stirrers
- Recirculating Cooler
- Ultrasonic Processor
- Gas Meter and Detectors
- Digital Refractometer
- Benchtop Refractometer
- Polarimeter
- Data Logger
- Hydrogen Generators
- Nitrogen Generators
- OXYGEN GENERATOR
- DRY AIR GENERATOR
- HYDROGEN & ZERO AIR GENERATORS
- LCMS GENERATORS